Info: 'Once you reformat, you cannot undo. Unless you save your original maze, you cannot retrieve it.'
3:
Bounds: x1=33, y1=25, x2=65, y2=57
Type: -96
Info: ' '
DITL_394.txt
Items: (6 entries)
0:
Bounds: x1=132, y1=145, x2=190, y2=165
Type: 4
Info: 'OK'
1:
Bounds: x1=29, y1=146, x2=87, y2=166
Type: 4
Info: 'Cancel'
2:
Bounds: x1=33, y1=28, x2=159, y2=47
Type: 6
Info: 'Horizontal Flip'
3:
Bounds: x1=34, y1=60, x2=140, y2=78
Type: 6
Info: 'Vertical Flip'
4:
Bounds: x1=34, y1=90, x2=153, y2=108
Type: 6
Info: 'Diagonal Flip'
5:
Bounds: x1=127, y1=139, x2=195, y2=171
Type: -64
Info: 'Ü'
DITL_393_frame2.txt
Items: (20 entries)
0:
Bounds: x1=288, y1=202, x2=346, y2=222
Type: 4
Info: 'OK'
1:
Bounds: x1=190, y1=202, x2=248, y2=222
Type: 4
Info: 'Cancel'
2:
Bounds: x1=20, y1=70, x2=126, y2=88
Type: 6
Info: 'Zero'
3:
Bounds: x1=20, y1=93, x2=126, y2=111
Type: 6
Info: 'One'
4:
Bounds: x1=20, y1=116, x2=126, y2=134
Type: 6
Info: 'Two'
5:
Bounds: x1=20, y1=138, x2=126, y2=156
Type: 6
Info: 'Three'
6:
Bounds: x1=20, y1=162, x2=126, y2=180
Type: 6
Info: 'Four'
7:
Bounds: x1=21, y1=187, x2=127, y2=205
Type: 6
Info: 'Five'
8:
Bounds: x1=187, y1=123, x2=262, y2=139
Type: 16
Info: ''
9:
Bounds: x1=297, y1=124, x2=372, y2=140
Type: 16
Info: ''
10:
Bounds: x1=248, y1=163, x2=323, y2=179
Type: 16
Info: ''
11:
Bounds: x1=247, y1=84, x2=322, y2=100
Type: 16
Info: ''
12:
Bounds: x1=207, y1=41, x2=345, y2=59
Type: -120
Info: 'Size of Borders:'
13:
Bounds: x1=246, y1=65, x2=321, y2=81
Type: -120
Info: 'Top:'
14:
Bounds: x1=187, y1=104, x2=262, y2=120
Type: -120
Info: 'Left:'
15:
Bounds: x1=298, y1=105, x2=373, y2=121
Type: -120
Info: 'Right:'
16:
Bounds: x1=247, y1=144, x2=322, y2=160
Type: -120
Info: 'Bottom:'
17:
Bounds: x1=65, y1=8, x2=324, y2=29
Type: -120
Info: 'Parameters for to-Center Mazes'
18:
Bounds: x1=283, y1=196, x2=351, y2=228
Type: -64
Info: 'Ü'
19:
Bounds: x1=18, y1=41, x2=104, y2=58
Type: -120
Info: 'Noise Tuner:'
DITL_390.txt
Items: (2 entries)
0:
Bounds: x1=121, y1=129, x2=179, y2=149
Type: 4
Info: 'OK'
1:
Bounds: x1=25, y1=19, x2=275, y2=110
Type: -120
Info: '^0'
DITL_384_wrongexits.txt
Items: (3 entries)
0:
Bounds: x1=162, y1=102, x2=220, y2=122
Type: 4
Info: 'OK'
1:
Bounds: x1=84, y1=22, x2=320, y2=98
Type: -120
Info: 'At least one of your entries had an error and could not be processed. At least one exit was not changed.'
2:
Bounds: x1=33, y1=25, x2=65, y2=57
Type: -96
Info: ' '
DITL_381_exit-instructions.txt
Items: (2 entries)
0:
Bounds: x1=78, y1=101, x2=136, y2=121
Type: 4
Info: 'OK'
1:
Bounds: x1=10, y1=16, x2=236, y2=80
Type: -120
Info: 'Position the mouse where you want exits and click. To cancel, click the same spot twice.'
DITL_380.txt
Items: (10 entries)
0:
Bounds: x1=239, y1=244, x2=335, y2=281
Type: 4
Info: 'No Change'
1:
Bounds: x1=23, y1=188, x2=81, y2=208
Type: 4
Info: 'left'
2:
Bounds: x1=132, y1=146, x2=190, y2=166
Type: 4
Info: 'top'
3:
Bounds: x1=111, y1=3, x2=238, y2=21
Type: -120
Info: 'Existing Exits:'
4:
Bounds: x1=232, y1=188, x2=290, y2=208
Type: 4
Info: 'right'
5:
Bounds: x1=16, y1=22, x2=340, y2=58
Type: -120
Info: '^0'
6:
Bounds: x1=16, y1=59, x2=340, y2=93
Type: -120
Info: '^1'
7:
Bounds: x1=26, y1=107, x2=344, y2=135
Type: -120
Info: 'Where would you like your ^2'
8:
Bounds: x1=132, y1=232, x2=190, y2=252
Type: 4
Info: 'bottom'
9:
Bounds: x1=132, y1=188, x2=190, y2=208
Type: 4
Info: 'inside'
DITL_370_wrongsize.txt
Items: (3 entries)
0:
Bounds: x1=162, y1=102, x2=220, y2=122
Type: 4
Info: 'OK'
1:
Bounds: x1=83, y1=22, x2=319, y2=98
Type: -120
Info: 'At least one of your entries had an error and could not be processed. Height and width must be between 4 and 250.'
2:
Bounds: x1=33, y1=25, x2=65, y2=57
Type: -96
Info: ' '
DITL_361_New2.txt
Items: (13 entries)
0:
Bounds: x1=240, y1=204, x2=298, y2=224
Type: 4
Info: 'OK'
1:
Bounds: x1=110, y1=204, x2=168, y2=224
Type: 4
Info: 'Cancel'
2:
Bounds: x1=103, y1=84, x2=178, y2=100
Type: 16
Info: ''
3:
Bounds: x1=302, y1=84, x2=377, y2=100
Type: 16
Info: ''
4:
Bounds: x1=22, y1=37, x2=370, y2=75
Type: -120
Info: 'This maze begins by connecting little pieces. Enter the minimum and maximum size for these pieces:'
5:
Bounds: x1=16, y1=83, x2=91, y2=99
Type: -120
Info: 'Minimum:'
6:
Bounds: x1=213, y1=81, x2=288, y2=97
Type: -120
Info: 'Maximum:'
7:
Bounds: x1=121, y1=9, x2=223, y2=27
Type: -120
Info: 'Woven Mazes'
8:
Bounds: x1=15, y1=110, x2=233, y2=149
Type: -120
Info: 'How hard should we try to connect? (1=not much; 8=a lot)'
9:
Bounds: x1=246, y1=122, x2=321, y2=138
Type: 16
Info: ''
10:
Bounds: x1=17, y1=157, x2=227, y2=176
Type: -120
Info: 'Maximum jump:'
11:
Bounds: x1=247, y1=161, x2=322, y2=177
Type: 16
Info: ''
12:
Bounds: x1=235, y1=198, x2=303, y2=230
Type: -64
Info: 'Ü'
DITL_360_New1.txt
Items: (9 entries)
0:
Bounds: x1=231, y1=216, x2=289, y2=236
Type: 4
Info: 'OK'
1:
Bounds: x1=95, y1=214, x2=153, y2=234
Type: 4
Info: 'Cancel'
2:
Bounds: x1=139, y1=57, x2=214, y2=73
Type: 16
Info: ''
3:
Bounds: x1=109, y1=162, x2=184, y2=178
Type: 16
Info: ''
4:
Bounds: x1=308, y1=162, x2=383, y2=178
Type: 16
Info: ''
5:
Bounds: x1=24, y1=17, x2=371, y2=51
Type: -120
Info: 'Enter number of rows deep you want the maze:'
6:
Bounds: x1=20, y1=86, x2=371, y2=146
Type: -120
Info: 'This maze chops the frame into chunks and then connects them. Enter the minimum and maximum size of chunks:'
7:
Bounds: x1=22, y1=161, x2=97, y2=177
Type: -120
Info: 'Minimum:'
8:
Bounds: x1=219, y1=159, x2=294, y2=175
Type: -120
Info: 'Maximum:'
DITL_354_mazesize.txt
Items: (7 entries)
0:
Bounds: x1=76, y1=164, x2=134, y2=184
Type: 4
Info: 'OK'
1:
Bounds: x1=125, y1=75, x2=200, y2=91
Type: 16
Info: '^0'
2:
Bounds: x1=125, y1=113, x2=200, y2=129
Type: 16
Info: '^1'
3:
Bounds: x1=12, y1=75, x2=87, y2=91
Type: -120
Info: 'Rows:'
4:
Bounds: x1=13, y1=114, x2=88, y2=130
Type: -120
Info: 'Columns:'
5:
Bounds: x1=19, y1=10, x2=200, y2=45
Type: -120
Info: 'Choose height (rows) and width (columns):'
6:
Bounds: x1=71, y1=160, x2=139, y2=188
Type: -64
Info: 'Ü'
DITL_340_NewThree.txt
Items: (11 entries)
0:
Bounds: x1=267, y1=148, x2=325, y2=168
Type: 4
Info: 'OK'
1:
Bounds: x1=169, y1=148, x2=227, y2=168
Type: 4
Info: 'Cancel'
2:
Bounds: x1=20, y1=70, x2=126, y2=88
Type: 6
Info: 'Zero'
3:
Bounds: x1=20, y1=93, x2=126, y2=111
Type: 6
Info: 'One'
4:
Bounds: x1=20, y1=116, x2=126, y2=134
Type: 6
Info: 'Two'
5:
Bounds: x1=20, y1=138, x2=126, y2=156
Type: 6
Info: 'Three'
6:
Bounds: x1=20, y1=162, x2=126, y2=180
Type: 6
Info: 'Four'
7:
Bounds: x1=61, y1=9, x2=291, y2=29
Type: -120
Info: 'Parameters for NewThree Maze'
8:
Bounds: x1=262, y1=142, x2=330, y2=174
Type: -64
Info: 'Ü'
9:
Bounds: x1=27, y1=41, x2=113, y2=58
Type: -120
Info: 'Tuner:'
10:
Bounds: x1=174, y1=68, x2=346, y2=103
Type: 5
Info: 'Multiple Exits'
DITL_150.txt
Items: (3 entries)
0:
Bounds: x1=296, y1=76, x2=376, y2=96
Type: 4
Info: 'Stop'
1:
Bounds: x1=192, y1=76, x2=272, y2=96
Type: 4
Info: 'Continue'
2:
Bounds: x1=64, y1=12, x2=376, y2=64
Type: -120
Info: '^0^1^2'
DITL_136.txt
Items: (3 entries)
0:
Bounds: x1=167, y1=128, x2=225, y2=148
Type: 4
Info: 'OK'
1:
Bounds: x1=27, y1=15, x2=399, y2=82
Type: -120
Info: 'Use the arrow keys or the numeric keypad. (For hexagonal mazes, the numeric keypad must be used to move because there are six possible routes out of each cell, not four.) On the numeric keypad, 8 moves up,'
2:
Bounds: x1=29, y1=78, x2=404, y2=115
Type: -120
Info: ' 4 left, 6 right, 2 down, and diagonal moves are made with the 7,9,1, and 3 keys.'
DITL_135.txt
Items: (3 entries)
0:
Bounds: x1=169, y1=129, x2=227, y2=149
Type: 4
Info: 'OK'
1:
Bounds: x1=15, y1=14, x2=390, y2=82
Type: -120
Info: 'To open a path (break down walls), press an arrow key or a 2, 4, 6 or 8. To close up a path (put a wall between cells), hold down the option key while pressing an arrow key or number. To move from one cell to another'
2:
Bounds: x1=15, y1=79, x2=386, y2=118
Type: -120
Info: 'with no changes, hold down the shift key while pressing an arrow key or number.'
DITL_132.txt
Items: (6 entries)
0:
Bounds: x1=177, y1=218, x2=239, y2=238
Type: 4
Info: 'OK'
1:
Bounds: x1=167, y1=144, x2=242, y2=160
Type: 16
Info: ''
2:
Bounds: x1=34, y1=7, x2=370, y2=74
Type: -120
Info: '^0'
3:
Bounds: x1=35, y1=81, x2=371, y2=129
Type: -120
Info: '^1'
4:
Bounds: x1=77, y1=177, x2=343, y2=203
Type: -120
Info: '^2'
5:
Bounds: x1=171, y1=214, x2=241, y2=242
Type: -64
Info: 'Ü'
DITL_130.txt
Items: (2 entries)
0:
Bounds: x1=204, y1=104, x2=284, y2=124
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=12, x2=288, y2=92
Type: -120
Info: 'Not enough memory!Try closing some documents or increasing the amount of RAM available to FutureBASIC II.'
DITL_129.txt
Items: (3 entries)
0:
Bounds: x1=260, y1=64, x2=316, y2=85
Type: 4
Info: 'OK'
1:
Bounds: x1=47, y1=8, x2=316, y2=56
Type: -120
Info: ''
2:
Bounds: x1=8, y1=8, x2=40, y2=40
Type: -96
Info: ' '
DITL_128.txt
Items: (2 entries)
0:
Bounds: x1=154, y1=116, x2=212, y2=136
Type: 4
Info: 'OK'
1:
Bounds: x1=23, y1=27, x2=324, y2=101
Type: -120
Info: 'This program is shareware. There should be instructions included with this program on how to pay the shareware fee. If not, contact bobs@kagi.com'